With the continuous improvement and development of the science and technology machinery industry, many packaging machines have appeared on the market. What is the working principle of the powder packaging machine, do you know? If you don’t know the powder packaging machine, then follow Shanghai Acepack packing machine company to understand!

The powder packaging machine is sealed on four sides, and the product is wrapped with flat film or cylindrical film, and the seam is sealed by lap. It is used for product packaging that requires sealing. One end is open, and the tray shrink packaging is a typical example. The film is made into a big square bottom bag, and then the big bag is put on the stacked commodity pallet from top to bottom, and then heat-shrinked. The powder packaging machine puts the pallet with the product on the conveyor belt and sets the shrink film bag; by the conveyor belt It is sent into the heat shrinkable channel, and the shrink packaging is completed after passing through the heat shrinkable channel. Its main feature is that the product can be firmly bundled in a certain number of units, will not be loose during transportation, and can be stacked in the open.

The power of the powder packaging machine is relatively large, please pay attention to the connection, the power of the input power must be greater than the nominal power of the heat-receiving packaging machine, otherwise it is easy to burn the circuit or the machine. So we should pay attention to: 1. The powder packaging machine must be reliably grounded and brushed A bottom wire should be drawn from the ground of the insulating paint to protect personal safety. 2. Each powder packaging machine has a power cable connected to the power supply when it leaves the factory, and its end lead part has a power supply identification symbol, which must be connected correctly, which is illegal The operation may cause the machine to burn out or get an electric shock. 3. The powder packaging machine must be installed horizontally, otherwise the service life of the electric heating tube will be shortened; for the machine with mesh belt transmission, its inclined installation will cause the conveyor belt to deviate from the center, which greatly reduces the use Life. 4. When the machine is used continuously for more than three months, the high temperature resistance line of the shrink room should be checked, and replaced according to its aging degree. 5. When the machine is working, the palm of the operator and other parts of the machine are not allowed to be in contact with the running part of the machine. Contact, especially the temperature inside the shrinking chamber is extremely high, it is easy to burn.

The powder packaging machine has the characteristics of simple operation, wide application range, good airtightness, high transparency, low cost and high grade. Having said so much, I must have a better understanding of the powder packaging machine! If you have any other questions or need the powder packaging machine, you can ask Shanghai Acepack packing machine company!